Oil and chips industrial vacuum cleaners
Industrial vacuum cleaners of the Tecnoil range of products are the ideal solution to always guarantee the maximum efficiency of the machine tools in the industries that carry out machanical processings. The functioning of Tecnoil vacuum cleaners is as simple as important: to allow you to quickly remove from machine tools oils and emulsions mixed to metallic chips waste by filtering and reinserting them in the system so that they can be reused for successive work cycles. So, the use of a Delfin vacuum cleaner for oil and chips allows to reuse the emulsions, by guaranteeing cost savings on the purchase of oils, and to reduce maintenance times and machines downtimes.
Check the catalog on >link<
Showing all 7 results
-
Oil and chips industrial vacuum cleaners
Single phase vacuum for separation of oil and metal chips DM 40 OIL
The DM40 OIL is the most compact vacuum cleaner in the Tecnoil line, created for extracting and recycling liquids, oils and emulsions from CNC machine tools, also when mixed with dust or mud. A sieve grid basket separates the vacuumed chips from the liquid. Once filtered, the liquid collects in the 60 litre container below. A drainage valve makes it is easy to discharge and re-insert the oil back into the machine, while the metal chips can be easily disposed of. Electrical floating device to stop the suction when container is full.
(0 reviews) -
Oil and chips industrial vacuum cleaners
Vacuum cleaner recycling lubricating oils TC 100 MPI
The TC100 MPI vacuum cleaner is a powerful vacuum cleaner equipped with 3 independent single-phase motors, designed specifically for the mechanical industry and maintenance of CNC machine tools. Coolant liquids and emulsions can be suctioned easily, separating off any metal chips or swarfs and allowing the vacuumed liquid to be reused, all at the same time! This means significant savings in terms of money and time spent servicing machinery. 100 litre liquid capacity, 40 litre sieve grid basket and 300micron PPL filter for metal chips and simultaneous suction, filtration and discharge of liquids!
(0 reviews) -
Oil and chips industrial vacuum cleaners
Vacuum cleaner for separating swarfs and recycling lubricating oils TC 100 IF
The TC100 IF vacuum cleaner is a powerful three-phase vacuum equipped with a side channel blower, designed specifically for the mechanical industry and maintenance of CNC machine tools. Coolant liquids and emulsions can be suctioned continuously, even 24 hours a day, separating off any metal chips or swarfs and allowing the vacuumed liquid to be reused. This can mean significant savings in terms of money and time spent servicing machinery. 100 litre liquid capacity, 40 litre sieve grid basket for metal chips and rapid discharge of liquid via reversed airflow.
(0 reviews) -
Single phase industrial vacuum cleaners
Vacuum separator for large quantities of solids ang liquids B 200 M, 3 kW
The B200 M vacuum separator can contain and separate large quantities of solids and liquids. Thanks to the presence of a rotating hub, the vacuum separator can be tilted by 45° – 90° to discharge the vacuumed material directly where necessary. 3 single-phase motors and integrated filter make the B200M an ideal all-purpose vacuum.
(0 reviews) -
Oil and chips industrial vacuum cleaners
Industrial vacuum CNC machine tool maintenance TC 220 MPI
The TC220 MPI vacuum cleaner is a powerful vacuum cleaner equipped with 3 independent single-phase motors, designed specifically for the mechanical industry and maintenance of CNC machine tools. Coolant liquids and emulsions can be easily suctioned, separating off any metal chips or swarfs and allowing the vacuumed liquid to be reused, all at the same time! This means significant savings in terms of money and time spent servicing machinery. 220 litre liquid capacity, 40 litre sieve grid basket for metal chips and simultaneous suction, filtration and discharge of liquids!
An inspection door allows to easily clean the inner part of the vacuum.(0 reviews) -
Oil and chips industrial vacuum cleaners
Industrial vacuum emptying tanks reservoirs TC 400 IF
The TC400 IF is a three-phase turbine vacuum cleaner with a large liquid collection capacity, designed to make extracting and separating chips and lubricating oils in tanks and reservoirs easier, particularly in heavy and continuous applications. The vacuum cleaner can recover and filter up to 400 litres of oil mixed with metal chips, and features an automatic stop for when the container is full. The filtered oils can be drained quickly using a system of reversed airflow (150 l/min) or (optionally) via a separate pump (300 l/min), while the chips are discharged using a tilting hopper with reduction gear.
(0 reviews) -
Oil and chips industrial vacuum cleaners
Industrial vacuum CNC machine tool maintenance TC 600
The TC600 is the most powerful vacuum cleaner in the range for recycling and separating oil from chips. Powerful turbine, 600 litre liquid capacity and 75 litres for chips. Forklift ready for easier handling, it is the ideal solution for sucking up oils and emulsions from CNC machine tools, also when mixed with dust or mud. Thanks to this vacuum cleaner, the problem of machine tool maintenance is a thing of the past.
(0 reviews)