Dust and chips collector Delfin ZFR EV AP 560 K5

EV AP 560 has been designed to be directly integrated on production lines and to directly collect light chips and fine suspended dust. Ideal and safe for the recovery of very thin chips (as those generated during the processing of aluminum and PVC), it guarantees top recovery efficiency.
A wide polyester filter and a 100 lt collection capacity make this dust collector the must-have to guarantee the top efficiency of continuous production lines or to remove large quantities of light chips while working.
The machine can be either supplied with a suction arm installed on it or to be installed on dedusting systems/production lines.
The ATEX-certified version is also available.

In Stock
Category:

Advantages

  • Integrated filter cleaning system
  • Complete steel construction
  • Extractable collection container with optional use of disposable bags
  • Easy filter replacement
  • High filtration efficiency
  • High air flow value
  • Full customization for specific needs
  • Conceived for the suction of fine dusts suspended in the air
  • Optional articulated arm to suction in a restricted area

Technical data

  • Voltage: 400V, 50Hz
  • Power: 5,5 kW
  • Curent draw: 10 A
  • Electrical protection: IP 55
  • Max waterlift: 470 mmH2O
  • Max air flow: 3000 m3/h
  • Suction inlet: 200 mm
  • Capacity: 100 lt.
  • Noise level (EN ISO 3744): 74 dB(A)
  • Dimensions l/w/h: 78x132x218 cm
  • Weight: 130 kg
  • Filter Type: Star
  • Surface/Diameter: 50.000 cm2/560 mm
  • Material/Efficiency: Polyester/ANT M (IEC 60335-2-69)
  • Cleaning system: Manual
  • Discharge system: Roll-out container

Optionals

  • Cartridge H14 absolute filter
  • Stainless steel AISI 304 collection tank
  • Stainless steel AISI 304 collection tank and filter chamber
  • Stainless steel AISI 304 filter chamber, collection tank, cover and frame
  • Earth grounding
  • Remote control
  • Extraction arm D.200 x 3.000 mm
  • Connection for flex hose Ø200/200
  • Connection for flex hose Ø200/150
  • Connection for flex hose Ø200/120
  • Connection for flex hose Ø200/100
  • Extraction arm D.200 x 3.000 mm

Datasheet-ZFREVAP560K5-001-EN